Resolve the “No Internet, Secured” Issue on Windows 10

Resolve the “No Internet, Secured” Issue on Windows 10

The “No Internet, Secured” error in Windows 10 can be frustrating, preventing users from accessing the internet despite being connected to a network. This issue can arise due to misconfigured network settings, outdated drivers, or software conflicts. Below are several effective solutions to help resolve this problem.

1. RESTART YOUR COMPUTER AND ROUTER

One of the simplest solutions is restarting your computer and router to refresh the network connection.

• Turn off your computer and unplug the router/modem.
• Wait for about 30 seconds before turning them back on.
• Reconnect to the network and check if the issue is resolved.

2. RUN THE NETWORK TROUBLESHOOTER

Windows includes a built-in troubleshooter to diagnose and fix network-related issues automatically.

• Go to Settings > Update & Security > Troubleshoot.
• Click on Additional troubleshooters.
• Select Internet Connections and click Run the troubleshooter.
• Follow the prompts to apply any suggested fixes.

3. FORGET AND RECONNECT TO THE NETWORK

If your network has incorrect settings saved, forgetting and reconnecting can help.

• Go to Settings > Network & Internet > Wi-Fi.
• Click Manage known networks.
• Select the network and click Forget.
• Reconnect by entering the correct Wi-Fi password.

4. UPDATE NETWORK DRIVERS

Outdated or corrupted network drivers can cause connectivity problems. Updating them may resolve the issue.

• Press Win + X and select Device Manager.
• Expand Network adapters.
• Right-click on your Wi-Fi or Ethernet adapter and select Update driver.
• Choose Search automatically for updated driver software.
• If an update is available, install it and restart your computer.

5. DISABLE AND RE-ENABLE THE NETWORK ADAPTER

Resetting the network adapter can help fix connectivity issues.

• Open Device Manager and expand Network adapters.
• Right-click your network adapter and select Disable device.
• Wait a few seconds, then right-click again and select Enable device.
• Try reconnecting to the network.

6. RESET TCP/IP STACK

Resetting the TCP/IP stack can clear any networking misconfigurations.

• Open Command Prompt as Administrator.
• Type the following commands, pressing Enter after each:

  netsh winsock reset
  netsh int ip reset
  ipconfig /release
  ipconfig /renew
  ipconfig /flushdns

• Restart your computer and try connecting again.

7. CHANGE DNS SETTINGS

Switching to Google’s DNS or another reliable DNS provider can help resolve connectivity issues.

• Open Control Panel > Network and Sharing Center.
• Click on Change adapter settings.
• Right-click your active network and select Properties.
• Double-click Internet Protocol Version 4 (TCP/IPv4).
• Select Use the following DNS server addresses and enter:
  • Preferred DNS: 8.8.8.8
  • Alternate DNS: 8.8.4.4
• Click OK and restart your connection.

8. TEMPORARILY DISABLE VPN OR FIREWALL

A VPN or firewall can interfere with network connectivity. Temporarily disabling them may help.

• If using a VPN, disconnect it and check if the issue is resolved.
• If using a third-party firewall, disable it temporarily and try reconnecting.
• Re-enable security settings after testing.

9. CHECK FOR WINDOWS UPDATES

Keeping Windows up to date ensures that network issues are patched.

• Go to Settings > Update & Security > Windows Update.
• Click Check for updates.
• Install any available updates and restart your computer.

10. RESET NETWORK SETTINGS

If none of the above solutions work, resetting network settings can restore default configurations.

• Go to Settings > Network & Internet > Status.
• Scroll down and click Network reset.
• Confirm the reset and restart your computer.

FINAL THOUGHTS

The “No Internet, Secured” error can be disruptive, but these troubleshooting steps should help restore connectivity. If the issue persists, consider contacting your Internet Service Provider (ISP) or seeking professional technical support. Let us know which solution worked for you!