Resolved: No Internet Access on Windows 10
Experiencing a “No Internet Connection” error on Windows 10 can be frustrating, especially when you need to get online for work or entertainment. This issue can occur due to various reasons such as network adapter problems, incorrect settings, or ISP-related issues. Below are several methods to troubleshoot and fix this problem effectively.
1. RESTART YOUR COMPUTER AND ROUTER
Before diving into complex solutions, restart your computer and router. This simple step can often resolve temporary network glitches.
- Turn off your computer and unplug your router/modem.
- Wait for about 30 seconds.
- Plug in the router/modem and turn your computer back on.
- Check if the internet connection is restored.
2. CHECK YOUR NETWORK CONNECTION STATUS
Ensure that your computer is properly connected to the network.
- Go to Settings > Network & Internet > Status.
- If it says No Internet access, try disconnecting and reconnecting to the Wi-Fi or Ethernet.
3. RUN THE NETWORK TROUBLESHOOTER
Windows has a built-in troubleshooter that can detect and fix network issues automatically.
- Open Settings > Update & Security > Troubleshoot.
- Click on Additional troubleshooters.
- Select Internet Connections and run the troubleshooter.
- Follow the on-screen instructions to apply suggested fixes.
4. RESET THE NETWORK ADAPTER
Your network adapter may have encountered an issue, and resetting it can help.
- Press Win + X and select Device Manager.
- Expand Network adapters.
- Right-click on your Wi-Fi or Ethernet adapter and select Disable device.
- Wait a few seconds, then right-click again and select Enable device.
- Check if your internet connection is back.
5. UPDATE NETWORK DRIVERS
Outdated or corrupt network drivers can cause connectivity issues.
- Open Device Manager and expand Network adapters.
- Right-click on your network adapter and choose Update driver.
- Select Search automatically for updated driver software.
- If no update is found, visit your adapter manufacturer’s website and download the latest driver.
6. FLUSH DNS AND RESET TCP/IP
Clearing the DNS cache and resetting TCP/IP settings can resolve connection problems.
- Open Command Prompt as Administrator.
- Type the following commands and press Enter after each:
netsh winsock reset netsh int ip reset ipconfig /release ipconfig /renew ipconfig /flushdns - Restart your computer and check your internet connection.
7. CHECK YOUR IP CONFIGURATION
Ensure that your network adapter is obtaining the correct IP address.
- Go to Control Panel > Network and Sharing Center.
- Click on Change adapter settings.
- Right-click your network connection and select Properties.
- Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
- Ensure Obtain an IP address automatically and Obtain DNS server address automatically are selected.
- Click OK and restart your PC.
8. DISABLE PROXY SETTINGS
Incorrect proxy settings may prevent internet access.
- Open Settings > Network & Internet > Proxy.
- Toggle Automatically detect settings ON.
- Make sure Use a proxy server is OFF unless required.
- Restart your browser and check the connection.
9. TEMPORARILY DISABLE FIREWALL AND ANTIVIRUS
Sometimes, security software may block your internet connection.
- Open Control Panel > Windows Defender Firewall.
- Click Turn Windows Defender Firewall on or off.
- Temporarily disable both Private and Public network firewalls.
- Check if the internet is working. If it is, add an exception for your network and re-enable the firewall.
10. RESET NETWORK SETTINGS
If none of the above methods work, resetting your network settings may help.
- Open Settings > Network & Internet > Status.
- Scroll down and click Network reset.
- Confirm the reset and restart your PC.
- Reconnect to your Wi-Fi or Ethernet and check if the issue is resolved.
FINAL THOUGHTS
The “No Internet Connection” error in Windows 10 can be resolved using the above methods. If the issue persists, contact your ISP to check for service outages. Let us know which solution worked for you!